|
|
|
|
Tanning Bed Timers
Tanning Salon Timing Systems
T-Max Manager
Accessories Supplied: 1 10' DB9F-DB9M Serial port cable, 1 DB9F-DB25M serial port adapter, 1 T-Max® Manager Users Guide, 1 T-Max® Utility Diskette, 1 Terminator, and 1 Power Supply.
Features: The T-Max® Manager is the front desk control unit for the T-Max® Series. It can be connected to up to 64 T-Max® 3As to control up to 64 tanning beds in a single tanning salon. The display consists of 8, two digit LED’s along the top of the T-Max® Manager, with a Start/Stop and a Set button below each display. A vertical row of 8 LED’s along the left side indicates which, bank of eight beds are being displayed. The T-Max® Manager can be used manually or be controlled with a PC using today's most popular tanning software. Information such as session counts, lamp hours, and bed hours can be monitored and changed either with a PC or using the T-Max® Manager manually.
Up to eight T-Max® Managers can be connected in a single salon. A PC can be connected to each T-Max® Manager in the salon. With two T-Max® Managers, up to 128 beds can be controlled in a single salon.
T-Max 3A Room Timer
Includes everything: 1, 50' tested modular cable with RJ-22 connectors on each end, 1, power supply, and 1, T-Max® 3A User's Guide.
The T-Max® 3A can operate as a stand-alone timer. Up, Down and Start/Stop buttons allow for easy control of your tanning bed. Terminals that screw down provide flexible and easy wire connections. All parameters such as lamp hours, session counts, bed hours etc. can be accessed and changed right on the T-Max® 3A. All of these provide an easy to install and inexpensive way to control a tanning bed from the front desk of your salon.
Two T-Max® 3As can be connected together for remote, single bed control. Simply place a T-Max® 3A in the tanning room and place the second T-Max® 3A at the front desk and connect them together using the modular cable provided. The T-Max® 3A at the front desk controls the T-Max® 3A in the tanning room. The customer in the tanning room will see their delay time and will be able to press the Start/Stop button to turn the tanning bed on or off, but will not be able to change session times. Session times are controlled by the T-Max® 3A at the front desk.